AW Series: Hi-Z / 70V Jumper Configuration.
Technical Support Guide
Table of Contents
Brand:
- JBL
Models:
- AW Series.
Overview:
AW Series speakers are designed for both low-impedance (8Ω) and high-impedance (70V/100V) distributed audio systems.
How to configure the jumper:
1. Locate the back panel of your speaker.
2. You will find a jumper on the speaker terminals.
3. Verify that the jumper is placed between the 8 OHMS and 70V JUMPER.
4. Now you can wire your speaker for Hi-Z (70v).
Note
For 8-OHMS operation simply remove the jumper and store it. The jumper is not needed for 8-OHMS.
Table of Contents